Skip to content

Amplifier 02

Available now · $89 USD

LYNCH THIRTY

The amp you keep playing.

Bring a lived-in British amplifier into your session, then shape the whole recording around it. Inspired by Robin Lynch’s own worn AC30, THIRTY gives you touch-sensitive breakup, six distinct voicings and a complete path from the first gain stage to the final studio effects. Add the included Radio preamp, place the microphones and find the sound that makes the part happen.

Apple Silicon M1+ · macOS 12+ · Mac AU (Logic/AU host) or Mac AAX Native (compatible Pro Tools; host OS requirements apply)

Permanent purchase · up to 3 computers · online activation, then offline use

THIRTY — full frontView 1 of 5 · Development previews. Final appearance may change.

Follow the feel. Shape the whole part.

  1. 01

    Clean up with your hands.

    Touch-sensitive breakup makes your attack part of the sound. Play gently for a cleaner response, then lean in for more edge. Normal, Top Boost and Linked paths give you different ways to feed the British-inspired core.

  2. 02

    Six ways into your next part.

    Original, Brian, Rory, Edge, Shadows and Sixties are six original voicings. The names mark inspirations, not endorsements or measured artist rigs. Start with a character, then make the part your own.

  3. 03

    A radio before the amp.

    The optional LYNCH RADIO PREAMP is included before the amplifier for another layer of drive and tone. No purchase of the full RADIO plug-in is required. The separate RADIO product has its own output stage and speaker system.

  4. 04

    Imperfection you can play.

    Broken Tube offers Off, One or Several for cracked breakup, crackle and uneven response; it is off by default. With Broken Tube on, Tap, Knock and Pow are temporary cabinet-hit gestures that excite the amp spring. They are playable hits, not a power-on effect. Recording Studio Reverb is separate.

  5. 05

    Move the mic. Change the story.

    Choose Blue Alnico-inspired or British Ceramic 2x12 cabinet responses, then dynamic, ribbon or condenser mic voicings. One SDC184-style pencil condenser pair offers two layouts: X/Y and ORTF. Distance runs from 2 cm to 10 m, with a room-field interpretation as you move further away.

  6. 06

    Finish the sound inside the rig.

    The optional Recording chain adds desk colour, EQ, compression, tape and cassette character, studio delay and reverb, then limiting. Shape the recorded sound within the rig, with each stage there when the part needs it.

New · Noise › Pickup Hum

Keep the tone. Lose the hum.

Single coils, a nearby screen, a lighting dimmer: some rooms make your guitar buzz before you play a note. Pickup Hum in THIRTY 0.7.2 for Mac AU listens to that interference once, then removes it with narrow, fixed cuts before the pedals and valve distortion can amplify it. Thirty’s existing gate and six-band processor are still there when you want them.

Pickup Hum is currently available in Mac AU. The AAX Native update follows after final host validation; no date has been announced, and the current AAX release does not include Pickup Hum.

THIRTY 0.7.0 — Noise › Pickup Hum, native interface

Learn it in two seconds.

  1. 01Keep the guitar in your playing position and hold all strings muted.
  2. 02Keep input monitoring or playback running so the plug-in hears the noise.
  3. 03Open Noise and click LEARN HUM, then wait about 2 seconds without playing.
  4. 04Compare ON and OFF at the same output level. Relearn if the noise or your position changes.
ON / OFF
A separate switch for Pickup Hum. It starts Off in new instances and in every existing sound, so nothing you made before changes.
Reduction · 0–30 dB
How deep each learned cut goes. Starts at 12 dB — raise it only as far as the hum needs.
Width · 1–12 Hz
How wide each cut is. Starts at 3 Hz; narrow cuts keep more of your tone.
LEARN HUM
Finds up to 12 prominent, narrow interference frequencies between 40 Hz and 4 kHz (a smaller range at low sample rates).

What it is — and isn’t.

Pickup Hum is a fixed, learned curve, not a gate, an AI denoiser or a broadband noise remover, and it cannot promise perfect removal. Hiss, clicks and changing noise remain. A quiet sustained note can be mistaken for hum, and deep or wide cuts can touch musical overtones near the learned lines — which is why the strings must be muted while learning.

Settings and learned frequencies save with your preset and project; no recorded audio is ever stored. Changing factory sounds keeps this input calibration, while Init clears it. It adds no latency.

Questions about the update.

I already own it. Do I pay again?
No. Updates come from your original order and keep your existing licence key, valid across AU and AAX Native, on up to three computers.
Will my projects sound different?
No. Updates keep your old projects and sounds; Pickup Hum starts Off in them.
Does it add latency?
No. Latency stays at 256 samples (5.33 ms at 48 kHz).
Does updating restart my trial?
No. Updates keep your settings and existing trial dates. The full 14 days begin only when you press Start trial.

LYNCH RADIO PREAMP → THIRTY

A radio before the amp.

Built-in LYNCH RADIO PREAMP — development preview

The scrapyard-radio experiment meets Thirty in one rig. Switch on the built-in LYNCH RADIO PREAMP to add controllable valve-inspired colour before the amplifier. Explore how hard it feeds the next stage: that interaction shapes the result, while Thirty keeps its own character. The preamp is included with Thirty — no separate Radio purchase is needed.

Read the Radio story

The audio route

Guitar → Pedalboard → LYNCH RADIO PREAMP (optional) → Thirty amplifier → Cabinet/mics → studio effects.

Lynch Radio is the first module-navigation button, before Amp Detail. That is the screen order; in the audio route, the Pedalboard comes before the preamp.

The preamp is optional. Init and existing factory sounds leave it off, preserving the previous Thirty signal; Legacy/Old processing bypasses it. Settings recall with AU sessions and full user presets.

Radio Input
Sets the signal level feeding the radio stages.
Radio Drive · 0–11
Pushes those stages harder for more character.
Radio Tone
Shapes the preamp’s treble loss.
Radio Output
Feeds Thirty harder; use final Output Trim to set the listening level.

This is the included Radio preamp, not the full LYNCH RADIO plug-in: the separate output stage, speaker system, broken-speaker behaviour and Radio effects are not included. The full LYNCH RADIO is a separate plug-in with its own output stage, speaker system and effects. Two asymmetric valve-inspired stages, coupling and tone loss form an original reduced Luxor-inspired interpretation — not a measured historical circuit or hardware-exact match.

The story

The amplifier that made me want to play.

Jon Iver’s amplifier

“The first AC30 in my life belonged to my stepfather, Jon Iver. There was already a guitar at home, and that amplifier sat there with its diamond grille and all that promise. Before I knew what to do with it, I wanted to find out what it could do.

Overdrive before chords

Before I knew how to play, I knew how to turn it up. I pushed the amplifier into overdrive long before my fingers could form proper chords, chasing distortion, feedback and wild sounds. It was noise, technically. It was also the fascination that made me learn the guitar. The amplifier made me want to play; the playing came second.

Tap, knock, pow

That old amplifier had its own character. A faulty tube gave the tone a cracked, grating edge, full of crackle and unevenness. Knock the cabinet and the spring reverb went pow. I can’t identify the component that had actually failed, but I remember what it did. THIRTY carries that memory in Broken Tube and the temporary Tap-Knock-Pow. The name is now hand-scratched in golden metal below the channel; older development images show it on the handle.”

— Robin Lynch

The other half of the beginning belongs to an old valve radio — read the story of RADIO.

Two beginnings, one lab: an old valve radio and a British amplifier are the origins of LYNCH AUDIO LAB.

In action

The full walkthrough.

A complete 34:58 tour of THIRTY with guitar examples — the modes, cabinets, microphones and effects in use. This is the full walkthrough; the short introduction below remains our own cinematic preview.

Watch on YouTube

A memory, in motion.

A short introduction to LYNCH THIRTY.

A cinematic development preview with narration only, not a guitar audio demo. The imagery is not an exact interface or product rendering.

Read the transcript

Some sounds stay with you for life. For Robin Lynch, one of them was his stepfather’s AC Thirty. The grit. The feedback. The feeling that made him want to play. Now that memory lives in Lynch Thirty: British-inspired amplifier character, cabinets, pedals and studio effects, brought together by Lynch Audio Lab. Find the sound that starts your next story.

A closer look at the rig.

  • Blue Alnico speakers

  • British Ceramic speakers

Under the panel

Under the panel

A tone stack is more interesting when you know why its controls interact. Here is our closer look at Thirty: the optional Radio preamp, the amplifier stages, the supply and the cabinets. Component values are nominal and explain behaviour; this is not a bill of materials to solder from.

How to read this section

  • Circuit-informed

    Modelled electrical interactions between components.

  • Designed voicing

    A filter, resonance or curve shaped deliberately, by ear.

  • Visual material

    Wood, cloth and metal you see and touch — not simulated for sound.

The signal path

The complete rig runs Guitar → Pedalboard → optional LYNCH RADIO PREAMP → Thirty amplifier → Cabinet/mics → studio effects. The first Lynch Radio navigation button describes the interface order, not the audio order: the Pedalboard feeds the optional preamp.

The Thirty amplifier core follows a circuit-informed reading of the classic JMI topology, with Normal, Top Boost and Linked paths. A shared ECC83/12AX7 input pair works into nominal 220k plate loads with a shared 1.5k/25µF cathode network, and the coupling capacitors carry state — so the amplifier’s behaviour has memory, like the real thing.

LYNCH RADIO PREAMP — the optional front stage

The built-in Radio preamp brings two asymmetric valve-inspired stages, with coupling and tone loss, into Thirty ahead of the amplifier core. It is an original reduced Luxor-inspired interpretation, not a measured historical Luxor circuit or hardware-exact match. The separate Radio power stage, speaker, broken-speaker behaviour and Radio’s other effects are not included.

Radio Input and Radio Drive (0–11) feed the radio stages; Radio Tone shapes treble loss. Radio Output sets how hard the preamp drives Thirty, while final Output Trim sets the final listening level. The Pedalboard comes before this stage, regardless of its position as the first navigation button.

Switch it off to preserve the previous Thirty signal. Init and existing factory sounds leave it off, and Legacy/Old processing bypasses it. Its settings recall with AU sessions and full user presets.

The input pair

The Normal channel enters through a 47nF coupling capacitor and a 500k volume control. The Brilliant/Top Boost entry uses a 500pF coupling capacitor with a 100pF bright bypass and its own 500k volume — which is why the two entries disagree so pleasingly about the top end.

Input and Miller effects and source loading are lumped approximations. There is no separate, exact simulation of your guitar cable or pickups hiding in here.

Top Boost and the tone network

An ECC83 gain stage feeds a nonlinear cathode follower, which drives an interacting passive tone network: a 50pF treble capacitor, two 22nF capacitors, a 100k slope resistor and 1M pots.

Bass and Treble are not independent shelving EQs. They lean on each other through the network, and that interaction is exactly why this tone stack feels the way it does — small moves, big consequences.

Phase inverter, Tone Cut and Linked

A coupled long-tail ECC83 phase inverter splits the signal for the power stage. The Tone Cut — 5nF into 250k — acts late, across the phase relationship, which gives it its particular way of softening the top without going dull.

The Linked mode retains the relative polarity of the two channels. Frequency-dependent cancellation can be part of the combination; it is a feature of the topology, not a fault to be repaired.

Four EL84s and a supply that breathes

Four EL84s in parallel pairs share a 50Ω/250µF cathode-bias network. Nonlinear grid loading, coupling states and the transformer load line are all part of the solve, with a nominal 4k plate-to-plate into 16Ω. Device-to-device variation has not been measured.

A reduced, GZ34-like supply model provides current-dependent plate and screen droop and recovery — not a complete rectifier and mains simulation. The transformer approximation covers impedance conversion and low-frequency rolloff, not measured hysteresis, leakage or resonance. Underneath it all, Koren-family nonlinear valve equations are solved with implicit, safeguarded Newton iterations and capacitor companion states. Oversampling runs at 8× at 44.1/48 kHz, 4× at 88.2/96 kHz and 2× at 192 kHz. We make no universal alias-free claim, and passing a numerical test is not the same thing as matching hardware.

Cabinets, microphones and room

The open-back 2x12 cabinets — Blue Alnico and British Ceramic — are algorithmic: filters and resonances, rear radiation, microphone-position tilt, excursion and thermal compression.

Microphone options include dynamic, ribbon and condenser solo voicings, plus one SDC184-style pencil condenser pair with two layouts: X/Y and ORTF. Distance spans 2 cm–10 m with a room-field interpretation. These are approximations shaped by ear, not measured speaker or microphone impulse responses.

Springs, tremolo and happy accidents

The spring reverb, vibrato and tremolo — and the faults — are reduced signal models, not exact physical reconstructions of a tank or a failure.

Broken Tube is off by default, with Off, One and Several settings for cracked breakup, crackle and uneven response. Tap, Knock and Pow are temporary cabinet-hit gestures that excite the amp spring only while Broken Tube is on — not power-on effects. The Recording Studio Reverb is a separate processor. These controls grow from the verified memory above.

Modelled, designed, seen

Three kinds of work live inside this amplifier. Some things are circuit-informed: electrical interactions that are genuinely modelled. Some things are designed voicings: filters and resonances shaped by ear. And some things are visual materials.

The copper panel, the grille cloth and the golden hand-scratched name are visual and tactile choices. No fabric weave, wood species or per-screw metallurgy was simulated for sound — and we think the amplifier is more honest for saying so.

Available now

Available formats.

THIRTY and RADIO are available as Mac AU for Logic and other AU-compatible hosts, and Mac AAX Native for Pro Tools. Current Mac AU: THIRTY 0.7.2 and RADIO 0.3.2, with Pickup Hum. Current AAX Native: THIRTY 0.6.0 and RADIO 0.2.0, without Pickup Hum; the AAX update follows after final host validation, with no date announced. Native Apple Silicon (M1 or later), macOS 12 or later, with a compatible host; Pro Tools may require a newer macOS. Latency stays at 256 samples (5.33 ms at 48 kHz); Pickup Hum adds none. Existing projects and sounds open as before.

VST3, Windows and standalone editions are planned separately. No dates or inclusion or upgrade terms have been announced.

Available now. Installers are Developer ID signed, Apple notarized and stapled. The new full guide applies to the current AU release; the current AAX release keeps its own guide. No Windows, Intel Mac, VST3, AAX DSP/HDX, AudioSuite or standalone edition is included.

Fourteen days. Start when you’re ready.

The updated versions include a full 14-day trial for each product, starting only when you press Start trial. No card, subscription, automatic charge or periodic noise bursts. Trial and purchase use the same installer.

The Mac AU and AAX Native installers are Developer ID signed and notarized by Apple. Current Mac AU is THIRTY 0.7.2 / RADIO 0.3.2 with Pickup Hum; current AAX Native is THIRTY 0.6.0 / RADIO 0.2.0, with its own guide. Each product has its own trial. Already own THIRTY or RADIO? Download the update from your original order and keep your existing licence key — no repurchase. Choose Start trial inside the plug-in when you are ready to begin.

Two formats. One licence.
One purchase covers AU and AAX Native on the same Mac, with no extra format licence. Trial and purchase use the same format-specific installer. Installing another format does not restart or change your existing trial dates.
Buy once. Keep making music.
A permanent purchase covers a maximum of 3 computers. Activate online with the license key from your Lemon Squeezy receipt, then work offline.
Move to another Mac.
Deactivate online to release that Mac. Deactivation preserves the original trial dates; it does not start a fresh trial.
Keep your settings. Keep your dates.
Presets, projects and updates retain settings and do not renew the trial.
When the trial ends.
THIRTY and RADIO pass the dry signal through with their normal reported latency after expiry. Their processing stops; buying and activating a license restores access.

Support & user guides

Download the free installer and complete English user guide directly — no email or card needed, and no automatic charge. Your full 14 days begin only when you choose Start trial inside the plug-in. Try your own guitar, in your own session, then buy when the sound feels right. Trial and purchase use the same installer; a purchase adds a permanent license key. Prefer email delivery? The free Lemon Squeezy option below includes the installer and guide, without a permanent key. Questions about your sound, setup or license? Contact product support.

RADIO and THIRTY are available now for Apple Silicon Mac, as AU and AAX Native plug-ins. The desktop Porta studios remain in development.