Skip to content

Amplifier 01

Available now · $49 USD

LYNCH RADIO

Find the grit between the stations.

Take your guitar somewhere a little less predictable. LYNCH RADIO turns Robin Lynch’s early valve-radio experiments into a playable guitar voice: warm drive, compact speaker colour and damaged-cone textures that lean into your attack. Use the complete radio sound, or send its preamp into another software amplifier.

Apple Silicon M1+ · macOS 12+ · Mac AU (Logic/AU host) or Mac AAX Native (compatible Pro Tools; host OS requirements apply)

Permanent purchase · up to 3 computers · online activation, then offline use

Development previews. Final appearance may change.

A small radio. A wide-open idea.

  1. 01

    Radio as an amplifier.

    RADIO combines the valve-inspired preamp, an output stage with supply sag and a compact speaker voice. Input, Drive, Tone and Output let you shape how hard the signal arrives, how it breaks up and where it sits in the session.

  2. 02

    Radio before your amplifier.

    PREAMP bypasses the output stage, sag and speaker, keeping the preamp and optional effects. Feed another software amplifier with radio colour, without taking the radio speaker with you.

  3. 03

    Let the paper fray.

    Broken Speaker I and II are two intensities of the same radio speaker — not two physical drivers. Torn-cone buzz and coil rub react to your input and attack. They work only in RADIO mode with the speaker enabled, never in PREAMP.

  4. 04

    Go all the way home. To eleven.

    The pointer follows Drive from 0–11. LEIFJORD glows on the approach; SANDNESSJØEN is the far-right arrival at maximum eleven. It is Robin’s personal homeward route, not a map of real station frequencies or geography.

  5. 05

    From rough colour to a finished part.

    Bring in the pedalboard and tape echo for movement, then use the optional Recording chain to shape desk colour, EQ, compression, tape character, delay, reverb and limiting. Keep the roughness that serves the song; control the rest.

New · Noise › Pickup Hum

Keep the tone. Lose the hum.

Single coils, a nearby screen, a lighting dimmer: some rooms make your guitar buzz before you play a note. Pickup Hum in RADIO 0.3.2 for Mac AU listens to that interference once, then removes it with narrow, fixed cuts before the pedals and the RADIO and PREAMP stages can amplify it.

Pickup Hum is currently available in Mac AU. The AAX Native update follows after final host validation; no date has been announced, and the current AAX release does not include Pickup Hum.

RADIO 0.3.0 — Noise › Pickup Hum, native interface

Learn it in two seconds.

  1. 01Keep the guitar in your playing position and hold all strings muted.
  2. 02Keep input monitoring or playback running so the plug-in hears the noise.
  3. 03Open Noise and click LEARN HUM, then wait about 2 seconds without playing.
  4. 04Compare ON and OFF at the same output level. Relearn if the noise or your position changes.
ON / OFF
A separate switch for Pickup Hum. It starts Off in new instances and in every existing sound, so nothing you made before changes.
Reduction · 0–30 dB
How deep each learned cut goes. Starts at 12 dB — raise it only as far as the hum needs.
Width · 1–12 Hz
How wide each cut is. Starts at 3 Hz; narrow cuts keep more of your tone.
LEARN HUM
Finds up to 12 prominent, narrow interference frequencies between 40 Hz and 4 kHz (a smaller range at low sample rates).

What it is — and isn’t.

Pickup Hum is a fixed, learned curve, not a gate, an AI denoiser or a broadband noise remover, and it cannot promise perfect removal. Hiss, clicks and changing noise remain. A quiet sustained note can be mistaken for hum, and deep or wide cuts can touch musical overtones near the learned lines — which is why the strings must be muted while learning.

Settings and learned frequencies save with your preset and project; no recorded audio is ever stored. Changing factory sounds keeps this input calibration, while Init clears it. It adds no latency.

Questions about the update.

I already own it. Do I pay again?
No. Updates come from your original order and keep your existing licence key, valid across AU and AAX Native, on up to three computers.
Will my projects sound different?
No. Updates keep your old projects and sounds; Pickup Hum starts Off in them.
Does it add latency?
No. Latency stays at 256 samples (5.33 ms at 48 kHz).
Does updating restart my trial?
No. Updates keep your settings and existing trial dates. The full 14 days begin only when you press Start trial.

The story

A radio with ideas above its station.

Twelve. No pedal. One scrapyard radio.

“At twelve, I wanted more distortion. A proper distortion pedal was beyond my budget, so I found an old valve radio at the scrapyard and started experimenting with it as a preamp into another amplifier. The radio did not survive the experiments. But the idea did: take what you can find, follow your ears and discover a sound of your own. Decades later, that same curiosity became the starting point for LYNCH RADIO — and now its preamp lives inside THIRTY, too.

From the scrapyard to the dance hall

By fourteen, I was playing guitar in a cover band at public dances in northern Norway, alongside experienced musicians roughly ten years older than me. That was another education: listen hard, keep up and make a room full of people move. I remember the radio as a Luxor or Grundig; an old Luxor later became the visual inspiration for LYNCH RADIO. I can’t identify the original model or circuit. What stayed with me was the warm wood, the woven cloth, the amber glow — and the search for more distortion.

The way home goes to eleven.

I was born in Sandnessjøen and grew up there. On the way home, Leifjord was the place just before arrival — where the butterflies of anticipation began. So the station dial on LYNCH RADIO is a personal map home, rather than an accurate chart of frequencies and geography. The pointer follows Drive: Leifjord begins to glow as you push on, and Sandnessjøen lights up fully at eleven. Eleven means extra gain within the same drive law, not a second amplifier. Some journeys deserve a little more.”

— Robin Lynch

The other half of the beginning belongs to a British amplifier — read the story of THIRTY.

Two beginnings, one lab: an old valve radio and a British amplifier are the origins of LYNCH AUDIO LAB.

A closer look at the rig.

  • RADIO — pedalboard

  • RADIO — tape echo

  • RADIO — recording rack

Under the panel

Under the panel

Here is the part for anyone who wants to know what sits behind a knob. We’ll walk through the stages, the gain structure and the speaker voicings — with a clear distinction between electrical modelling, choices shaped by ear and the materials you see.

How to read this section

  • Circuit-informed

    Modelled electrical interactions between components.

  • Designed voicing

    A filter, resonance or curve shaped deliberately, by ear.

  • Visual material

    Wood, cloth and metal you see and touch — not simulated for sound.

The signal path

LYNCH RADIO is an original, reduced signal model rather than a component-by-component replica of any specific radio. The pedal and valve path runs at four times the project sample rate, so the nonlinear stages stay well behaved where the harmonics pile up.

The four main controls have distinct jobs. Input sets how hard the signal arrives, Drive pushes the stages harder — it does not quietly turn the loudness down to compensate — Tone shapes the top end, and Output sets the final level. Gain staging matters, and the initial state is intentionally clean: no built-in noise, no studio chain switched on.

Two valve-inspired stages

The core is two asymmetric, valve-inspired nonlinear stages. Between them sit a high-pass coupling and a passive-style treble loss, and the bias shifts how asymmetric the clipping becomes — which is where a lot of the character lives.

This is not an identified Luxor valve complement or a component-exact network. The original radio’s circuit is unknown, so the design is an original one, inspired by the memory rather than traced from a schematic.

RADIO and PREAMP

In RADIO mode the signal continues into a nonlinear output stage with envelope-dependent supply sag — the supply dips as you play harder and recovers as you relax — followed by an algorithmic small-speaker voicing. That sag is part of why the radio feels alive under the fingers.

PREAMP mode taps the signal just after the distorting preamp, before the output stage, sag and speaker, so it can feed another software amplifier. The pedals and recording effects remain available in both modes.

Speaker voicings, honestly named

Paper Cone, Oval Midrange and Warm Cloth are designed filter and resonance voicings. Warm Cloth is a name, chosen for how it feels — not a physical woven-cloth acoustic simulation.

Broken Speaker I and II are two intensities of the same radio speaker, not two physical drivers. Torn-cone buzz and coil rub are signal-driven, reacting to input and attack. They are active only in RADIO mode with the speaker engaged, never in PREAMP. These are designed responses, not a capture of a damaged speaker.

Pedals, echo and the recording rack

The fuzz uses two bias-dependent, reduced transistor transfer stages with feedback and coupling — transistor-flavoured, but not a transistor-by-transistor circuit simulation. The drive pedal uses a nonlinear diode-feedback equation with capacitor state; the wah is a resonator and the compressor a dynamics stage. Transistors belong to the pedals; the radio’s core stays valve-themed.

The tape echo adds modulation and feedback, and the recording rack — desk, EQ, compression, tape, noise, delay, reverb and limiter — is entirely optional and matched to no artist but you.

Modelled, designed, seen

Three kinds of work live inside this instrument. Some things are circuit-informed: electrical interactions that are genuinely modelled. Some things are designed voicings: filters and resonances shaped by ear until they feel right. And some things are visual materials.

The walnut, the woven cloth and the amber glow are visual and tactile choices drawn from a memory. No per-wire metallurgy, fabric weave or wood species was simulated for sound — and we think the instrument is more honest for saying so.

Available now

Available formats.

THIRTY and RADIO are available as Mac AU for Logic and other AU-compatible hosts, and Mac AAX Native for Pro Tools. Current Mac AU: THIRTY 0.7.2 and RADIO 0.3.2, with Pickup Hum. Current AAX Native: THIRTY 0.6.0 and RADIO 0.2.0, without Pickup Hum; the AAX update follows after final host validation, with no date announced. Native Apple Silicon (M1 or later), macOS 12 or later, with a compatible host; Pro Tools may require a newer macOS. Latency stays at 256 samples (5.33 ms at 48 kHz); Pickup Hum adds none. Existing projects and sounds open as before.

VST3, Windows and standalone editions are planned separately. No dates or inclusion or upgrade terms have been announced.

Available now. Installers are Developer ID signed, Apple notarized and stapled. The new full guide applies to the current AU release; the current AAX release keeps its own guide. No Windows, Intel Mac, VST3, AAX DSP/HDX, AudioSuite or standalone edition is included.

Fourteen days. Start when you’re ready.

The updated versions include a full 14-day trial for each product, starting only when you press Start trial. No card, subscription, automatic charge or periodic noise bursts. Trial and purchase use the same installer.

The Mac AU and AAX Native installers are Developer ID signed and notarized by Apple. Current Mac AU is THIRTY 0.7.2 / RADIO 0.3.2 with Pickup Hum; current AAX Native is THIRTY 0.6.0 / RADIO 0.2.0, with its own guide. Each product has its own trial. Already own THIRTY or RADIO? Download the update from your original order and keep your existing licence key — no repurchase. Choose Start trial inside the plug-in when you are ready to begin.

Two formats. One licence.
One purchase covers AU and AAX Native on the same Mac, with no extra format licence. Trial and purchase use the same format-specific installer. Installing another format does not restart or change your existing trial dates.
Buy once. Keep making music.
A permanent purchase covers a maximum of 3 computers. Activate online with the license key from your Lemon Squeezy receipt, then work offline.
Move to another Mac.
Deactivate online to release that Mac. Deactivation preserves the original trial dates; it does not start a fresh trial.
Keep your settings. Keep your dates.
Presets, projects and updates retain settings and do not renew the trial.
When the trial ends.
THIRTY and RADIO pass the dry signal through with their normal reported latency after expiry. Their processing stops; buying and activating a license restores access.

Support & user guides

Download the free installer and complete English user guide directly — no email or card needed, and no automatic charge. Your full 14 days begin only when you choose Start trial inside the plug-in. Try your own guitar, in your own session, then buy when the sound feels right. Trial and purchase use the same installer; a purchase adds a permanent license key. Prefer email delivery? The free Lemon Squeezy option below includes the installer and guide, without a permanent key. Questions about your sound, setup or license? Contact product support.

RADIO and THIRTY are available now for Apple Silicon Mac, as AU and AAX Native plug-ins. The desktop Porta studios remain in development.