Skip to content

Effects · Available now · $29 USD

LYNCH Broke Compressor

Keep the pulse. Shape the pressure.

Give a track gentle control, bus glue or a firmer punch with five dynamics characters. Compress changes threshold and ratio, Attack and Release shape the gesture, and parallel Mix keeps the original attack within reach.

Apple Silicon · AU · macOS 12+ · 0.7.2

AU-compatible host required

Each is a permanent, one-time purchase for up to three computers.

Inside the sound

Init And Preset Readability

Init resets to a clean starting sound.

Five Characters

Gentle / Glue / Punch / Worn / Tape Tape adds inherent soft saturation and a softer compression knee.

Host Compatibility

11 host parameters: stable existing IDs, retired Auto Gain ID8, retired Tube Limiter ID9, retired Limiter Amount ID10.

Guide Window

Guide opens a scrollable reading panel inside the plugin, in front of the controls and at the current UI scale.

Separate Peak Control

The final Tube Limiter has been removed from Broke Compressor.

Find its place in the song

  • Init resets to a clean starting sound.
  • Gentle / Glue / Punch / Worn / Tape Tape adds inherent soft saturation and a softer compression knee.
  • 11 host parameters: stable existing IDs, retired Auto Gain ID8, retired Tube Limiter ID9, retired Limiter Amount ID10.

Start with the part

  1. Init resets to a clean starting sound.
  2. Gentle / Glue / Punch / Worn / Tape Tape adds inherent soft saturation and a softer compression knee.
  3. An original vintage-inspired effect with the simple Broke feel: cream, charcoal, rust and warm sound.
  4. Compress lowers the threshold from -3 to -36 dB and increases the ratio with a soft knee.

The controls, in detail

Five Characters

Gentle / Glue / Punch / Worn / Tape Tape adds inherent soft saturation and a softer compression knee. Compress raises both compression and modeled tape rounding; Color adds more wear.

An original vintage-inspired effect with the simple Broke feel: cream, charcoal, rust and warm sound. Five Character buttons and 16 Starting Points. No commercial hardware emulation or third-party audio library.

Compress lowers the threshold from -3 to -36 dB and increases the ratio with a soft knee. Gentle is mild, Glue binds a group, Punch grabs harder, Worn goes further. Attack: 0.5–60 ms; Release: 30–1200 ms. Stereo-linked detection preserves balance. Bounded automatic makeup keeps the sound useful. Mix is parallel compression. The GR readout shows gain reduction, not total level change.

Color: compensated four-times oversampled soft saturation, gentle high-frequency softening and character-dependent warmth. Zero retains clean color; higher settings create audible texture. It is modeled color rather than actual tape/tube circuitry. Output: -36 to +6 dB; watch the peak meter and leave headroom. Bypass passes latency-aligned input at unity.

Mix: 0% is dry, 100% is effect only. Use 100% on an aux for Delay/Reverb; blend on a direct channel. Dry audio is aligned with the 16-sample processing latency.

Starting Points selects a curated setup. The arrows browse them. Save writes a standard .aupreset file; User loads a preset from this exact plugin. Current settings are also recalled with the host project. Character changes its voicing without replacing your knob values.

Hover is off initially. Enable it for click-free control of the main dials. Move within the control bounds to reach its full range; Escape disables Hover. Drag or scroll normally; Shift gives finer control. Right-click provides Reset to Default and Automation / MIDI assignment help. All eight active sound parameters support host automation. Use Logic's Controller Assignments for MIDI control; internal MIDI Learn is not included. ? enables the help reminder; each control includes an English tooltip. UI Size offers 75–150%, limited by available display area. The host owns the outer window.

Supported sample rates: 8–192 kHz; mono-to-mono, mono-to-stereo and stereo-to-stereo. Apple Silicon native AUv2 Fixed reported 16-sample latency. No render-time file access or allocation. Input/output headroom and musical taste still matter. Technical validation does not replace listening in a real session.

Host Compatibility

11 host parameters: stable existing IDs, retired Auto Gain ID8, retired Tube Limiter ID9, retired Limiter Amount ID10. No old IDs were reused.

Guide Window

Guide opens a scrollable reading panel inside the plugin, in front of the controls and at the current UI scale. Close or Escape returns to your sound without changing any settings. Select and copy guide text if needed. Hover Control pauses while the guide covers the knobs and resumes after closing; its ON/OFF preference stays.

Separate Peak Control

The final Tube Limiter has been removed from Broke Compressor. Use Lynch Broke Tube Limiter as a separate Audio FX insert if desired. Legacy IDs8–10 remain inert for old project compatibility. Original compression, Color, Mix, Attack, Release, Output and the five characters are retained.

Init And Preset Readability

Init resets to a clean starting sound. Factory IDs and saved presets are unchanged. The preset control uses the light Broke appearance, including in a dark host. Use Save/User or your host project to save the initialized sound.

Your session. Your sound.

Install and choose the right host slot

Apple Silicon Mac, macOS 12 or later. Audio Unit only; no Intel Mac, Windows, VST3 or standalone application is included. Use an AU-compatible host and insert on an audio track, instrument audio output or bus.

Save your session before installation. Use the verified current installer and follow its installation prompts, then restart the host if the newly installed AU is not listed. Select the product under Lynch Audio Lab in the appropriate slot.

Trial and permanent licensing

Download the trial installer shown on the product page; the same installer is used for trial and purchase. No card is needed for the trial.

Open the plug-in, click Trial & Activation at the bottom and press Start trial to begin its full 14 days. Installing, opening a preset or downloading a guide does not start a new trial. Each product has its own trial. There is no subscription, automatic charge or periodic noise burst.

For a permanent purchase, use the exact Buy link on the product page. Lemon Squeezy supplies a license key in the receipt. Connect this Mac to the internet, click Trial & Activation at the bottom, paste the receipt key for this exact product and choose Activate. A permanent license allows a maximum of three computers. After successful activation, work offline.

To free a Mac’s activation, connect it to the internet, open Trial & Activation and choose Deactivate this Mac. This releases that computer without renewing or resetting trial dates. Presets, project settings and updates do not renew the trial and retain settings.

The login Keychain stores trial and license-key records separately from presets. If it is locked, unlock it normally and press Refresh in Trial & Activation. Keep the system date correct.

At expiry, audio effects return latency-aligned dry audio with normal reported latency; instruments are silent; MIDI tools stop output and release held notes. Presets and project settings remain. Purchase activation restores licensed processing rather than a new trial.

Save, recall and automate

Save the host project to retain the AU instance. Use the product-specific preset operations described in the control chapters for reusable sounds. Preset files, complete project state and controller assignments can have different scopes; do not treat them as interchangeable.

When using host automation, choose an exposed sound parameter, record a short test pass and replay from before the first change. Check module enables, routing and output level. Only use product-local MIDI Learn when this manual explicitly documents it; otherwise use the host’s controller-assignment workflow.

Troubleshooting and support

If the AU is missing, save your session, install the current package and restart the AU-compatible host. Check the required macOS version and Apple Silicon architecture, then review the host’s plug-in manager. Do not delete a working production project to troubleshoot an insert.

For no sound or no processing, first check the correct slot, track input/output, incoming audio or MIDI, bypass/mute, module enables, mix/return amounts and trial or activation status. Test a simple documented starting point before adding a complex chain.

If the sound is too loud or distorted, reduce drive or output and inspect later inserts and the host master. Sample-peak protection does not guarantee intersample peaks. Source clipping cannot be repaired simply by lowering a later trim.

For dropouts, reduce active polyphony, unison, long returns or dense processing where applicable, or use the host’s freeze/bounce workflow. A larger buffer can help scheduling; it cannot cure sustained processing overload.

For activation trouble, check the internet connection and use the key for this exact product from the Lemon Squeezy receipt. For help, contact info@lynchaudiolab.com with product version, macOS version, AU host and a short description. Never send your private license key publicly.

Support · info@lynchaudiolab.com