LYNCH PREAMP — private0.1 Six original tube/transistor-inspired circuit voices. Their transfer curves, asymmetry, low-frequency saturation and memory differ. These are musical DSP interpretations of published preamp concepts, not measured hardware clones. VALVE Two asymmetric soft stages with level-dependent recovery, inspired by tube preamps such as the610 family. Bias shifts the asymmetry and harmonic balance. CLASS A Two transistor-inspired asymmetric stages with a transformer low-frequency branch, drawing on classic73-family operating ideas. It emphasizes rounded weight and progressively thicker drive. DISCRETE A fast differential soft stage with bounded slew and output-stage asymmetry, inspired by discrete opamp/transformer preamps. It has a tighter, more symmetric attack than Valve and a different harmonic balance. GERMANIUM Lower-knee asymmetry with a bounded local feedback memory. Gain/feedback ideas inspire its compressed, thick response; it is not Chandler's circuit algorithm. CONSOLE A cleaner differential transfer with lighter asymmetry and gradual compression. Use higher Headroom and lower Drive for subtle color. LYNCH DUAL A cascaded asymmetric stage, push-pull saturation and level-dependent recovery. It can add soft density or aggressive grit without merely renaming another voice. GAIN AND COLOR Input is ordinary input gain. Drive increases circuit excitation and adds both saturation and level; it is partially compensated, so use Output to set final level. Headroom changes the circuit's saturation threshold. Bias changes even/ odd-harmonic balance and asymmetry. Transformer blends a saturating LF branch; it does not simply add a static bass boost. Body and Air are broad output shelves inside the Preamp module. Preamp Off bypasses circuit/Body/Air together. There is no forced hiss or fictional microphone phantom-power control. FILTERS AND OUTPUT High Pass and Low Pass are independent of Preamp On. HP20Hz reads Off; LP0 reads Closed and LP20k reads Open. Their fixed musicalQ TPT filters smooth cutoff changes. Polarity reverses both channels. Mix0 and Bypass use the same exact 96-sample delayed dry signal. Output trims level after processing. Audio uses8x oversampling at44.1/48kHz and4x at88.2/96/192kHz, reporting fixed 96-sample host latency. Sample Protect is optional sample protection, not a true-peak mastering limiter. Watch input/outputRMS, sample peak and protection meters when increasing Drive or lowering Headroom. Init disables the circuit and filters. Grouped starts cover voices/instruments; use arrows, Save/Load and Init to manage settings. Every sound control is exposed to host automation. Drag/scroll/Shift fine adjustment and reset are available. Enable ? for contextual explanations. The integrated Guide closes with Escape; Scale provides six screen-bounded sizes. No hover-only parameter changes. Published context: UA2-610 tube-preamp operating guide, AMS Neve1073 ClassA transformer descriptions, API512c discrete2520 architecture and Chandler's Germanium gain/feedback manual. Original DSP, no vendor source code or samples. Private arm64 AU; actual Logic-session audition remains part of Robin's QA.