LYNCH VIRAL — USER GUIDE FIRST SOUND Install the AU, restart the host and create a software-instrument track. Choose VIRAL in the instrument slot, enable the host audio engine and send MIDI to the track. Browse VIRAL Originals or use Init to begin from a simple sound. Use the keyboard along the bottom to audition the instrument without a physical MIDI controller. The trial/activation footer shows the current package version; older version lettering may remain in the original panel artwork. LIBRARY AND PRESETS Search sounds filters the program browser. The category menu narrows it to originals, User, Favorites or musical roles. Select a program, then play held notes as well as short notes: pads and sequences may need time to develop. The star button marks a favourite. Info describes a program's origin and any translation limitations. Open reads an .aupreset; Save writes your edited sound as an .aupreset. The default user location is ~/Library/Audio/Presets/Lynch Audio Lab/VIRAL/User. Save the DAW project as well to retain the complete instance state. Init changes the sound; save an edit before replacing it. Panic is the immediate way to stop stuck notes. AN INDEPENDENT INSTRUMENT VIRAL uses original independent synthesis, not Access firmware, a hardware ROM or a hardware-exact Virus emulator. The release does not bundle private translated banks. If you import a permitted translated preset yourself, read Info: unsupported modulation or effects may be skipped, quiet programs may need adjustment and unison is limited. A translated parameter set is an approximation, not the original synthesizer's sound engine. Keep source presets separate from your VIRAL user edits. SYNTH The two main oscillators provide their own engine/wave choices, shape, pulse width, tuning and levels. Start with one oscillator, then add the second and listen to the balance. Detune adds beating; sync, FM and ring modulation add more complex harmonics. Sub and Noise are additional sources. The detailed parameter page also exposes the third oscillator controls. Cutoff darkens or opens the filter; resonance emphasises its selected region. Two filters offer mode, routing and balance choices. Change routing deliberately: the same cutoff settings can sound different when the filters are arranged differently. ENVELOPES Amplitude Attack sets the onset, Decay moves to Sustain, and Release controls the tail after note-off. A low sustain makes a pluck; a longer attack/release makes a slower part. The separate filter envelope uses its own timing and positive or negative amounts for the two filters. Start with modest resonance and envelope depth, then increase them while playing. Envelope sustain-slope controls change the held portion of the sound. MIX AND UNISON Oscillator level, Sub, Noise and balance determine what reaches the following stages. Unison adds oscillator voices per played note, with separate detune and stereo spread. More unison and held notes increase processing cost. Reduce unison or effects if the host overloads. Use Output to match listening level before deciding that a louder edit sounds better. MOTION The two LFO sections provide shape, rate and modulation destinations. Free rate works in Hz; host-sync choices follow musical beat settings when host tempo is available. Pitch and pulse-width destinations create movement in the oscillators; cutoff and pan destinations move tone or position. Four matrix routes each choose a source, target and bipolar amount. Set amount near zero before trying a new source/target, then add depth. Motion and Colour are performance macros; their result depends on the programmed sound. EFFECTS Drive adds soft saturation and has its own tone control. Chorus uses modulated stereo delays for movement. Ping-pong Delay has mix, time, feedback, tone and tempo-sync choices. With sync active, the musical beat setting determines time. Feedback raises the number and density of repeats; lower the mix while finding the right feedback. Space provides diffuse stereo reverb with size, decay, damping and width. Balance the sound dry first, then add the returns you need. Stereo width should also be checked through a mono listening path. PLAY Choose polyphonic, monophonic or legato behaviour to suit the part. Glide makes pitch transitions; pitch-bend up/down limits are independent. Pan and Stereo width shape the output. The arpeggiator provides note order, up to four octaves, gate, swing and latch. Hold notes to audition it. Use host sync when the pattern should follow the session; internal tempo is a separate choice. If a note remains held because Latch is active, disable Latch or use Panic. Arpeggiator MIDI notes still need a running host audio engine. DETAIL AND AUTOMATION Detail exposes all sound parameters rather than only the main page's selected controls. Double-click resets a control; Return accepts a typed value in the detailed editor. The DAW can automate the exposed sound parameters. Browser actions and favourites are library/UI actions, not an automation lane. Store the project after arranging automation and check playback from before the first change. TROUBLESHOOTING No sound: check the instrument slot, MIDI destination, host audio engine, Output, envelopes and trial/activation status. Test Init and a single MIDI note before testing an imported program. Unexpected tail: reduce delay feedback/reverb decay and check sustained notes, latch and MIDI sustain. Use Panic to clear a stuck performance. Unexpected translated sound: read Info and compare supported parameters; VIRAL does not run the originating hardware engine. Distortion: lower oscillator level, Drive or Output, and check the DAW's master and later inserts. Missing user sound: use Open to locate the .aupreset, or inspect the VIRAL User folder. A DAW track setting and a plug-in user preset are different files. CPU overload: reduce unison, sustained polyphony and long effects, or use a larger host buffer while mixing. CONTROL REFERENCE The following ranges and initial values come from the current parameter definitions. They are host values, not a claim of hardware circuit values. Many amounts use 0–1 for 0–100%; pan and bipolar modulation can be negative. Cutoff uses Hz; envelope/glide/delay times use seconds where the interface does not show converted milliseconds. Selector numbers represent the choices displayed in the corresponding menu. A preset may start with different values from the initial definition. 000 Output | range 0 to 1 | initial .6 001 Waveform | range 0 to 2 | initial 1 002 Cutoff | range 20 to 20000 | initial 3500 003 Resonance | range 0 to .95 | initial .15 004 Attack | range .001 to 10 | initial .01 005 Decay | range .001 to 10 | initial .2 006 Sustain | range 0 to 1 | initial .7 007 Release | range .001 to 15 | initial .35 008 Tune | range -24 to 24 | initial 0 009 Extended engine | range 0 to 1 | initial 0 010 Osc 1 shape | range 0 to 127 | initial 64 011 Osc 1 base wave | range 0 to 1 | initial 0 012 Osc 1 pulse width | range 0.05 to 0.95 | initial 0.5 013 Osc 1 semitone | range -64 to 63 | initial 0 014 Osc 1 key follow | range -2 to 2 | initial 1 015 Osc 2 shape | range 0 to 127 | initial 64 016 Osc 2 base wave | range 0 to 1 | initial 0 017 Osc 2 pulse width | range 0.05 to 0.95 | initial 0.5 018 Osc 2 semitone | range -64 to 63 | initial 0 019 Osc 2 key follow | range -2 to 2 | initial 1 020 Osc 2 detune cents | range 0 to 100 | initial 0 021 Osc balance | range 0 to 1 | initial 0.5 022 Sub level | range 0 to 1 | initial 0 023 Sub triangle | range 0 to 1 | initial 0 024 Noise level | range 0 to 1 | initial 0 025 Ring level | range 0 to 1 | initial 0 026 FM depth | range 0 to 4 | initial 0 027 Osc 2 sync | range 0 to 1 | initial 0 028 Osc level | range 0 to 2 | initial 1 029 Pan | range -1 to 1 | initial 0 030 Filter 1 mode | range 0 to 7 | initial 0 031 Filter 2 mode | range 0 to 3 | initial 0 032 Filter 2 cutoff | range 20 to 20000 | initial 3500 033 Filter 2 resonance | range 0 to 0.95 | initial 0.15 034 Filter routing | range 0 to 3 | initial 0 035 Filter balance | range 0 to 1 | initial 0.5 036 Filter 1 key follow | range -2 to 2 | initial 0 037 Filter 2 key follow | range -2 to 2 | initial 0 038 Filter key base | range 0 to 127 | initial 60 039 Filter 1 env octaves | range -10 to 10 | initial 0 040 Filter 2 env octaves | range -10 to 10 | initial 0 041 Filter attack | range 0.001 to 10 | initial 0.01 042 Filter decay | range 0.001 to 10 | initial 0.2 043 Filter sustain | range 0 to 1 | initial 0.7 044 Filter release | range 0.001 to 15 | initial 0.35 045 Amp sustain slope | range -2 to 2 | initial 0 046 Filter sustain slope | range -2 to 2 | initial 0 047 Unison voices | range 1 to 4 | initial 1 048 Unison detune cents | range 0 to 60 | initial 0 049 Unison stereo spread | range 0 to 1 | initial 0 050 LFO 1 rate | range 0.01 to 40 | initial 1 051 LFO 1 shape | range 0 to 5 | initial 0 052 LFO 1 osc 1 pitch | range -12 to 12 | initial 0 053 LFO 1 osc 2 pitch | range -12 to 12 | initial 0 054 LFO 1 pulse width | range -0.45 to 0.45 | initial 0 055 LFO 2 rate | range 0.01 to 40 | initial 1 056 LFO 2 shape | range 0 to 5 | initial 0 057 LFO 2 cutoff 1 | range -5 to 5 | initial 0 058 LFO 2 cutoff 2 | range -5 to 5 | initial 0 059 LFO 2 pan | range -1 to 1 | initial 0 060 Velocity sensitivity | range -1 to 1 | initial 1 061 Transpose | range -64 to 63 | initial 0 062 Osc 3 wave | range 0 to 4 | initial 0 063 Osc 3 level | range 0 to 1 | initial 0 064 Osc 3 semitone | range -64 to 63 | initial 0 065 Osc 3 detune cents | range 0 to 100 | initial 0 066 Env osc 2 pitch | range -48 to 48 | initial 0 067 Pitch bend up | range 0 to 48 | initial 2 068 Pitch bend down | range 0 to 48 | initial 2 069 Arpeggiator mode | range 0 to 6 | initial 0 070 Arpeggiator tempo | range 63 to 190 | initial 120 071 Arpeggiator octaves | range 1 to 4 | initial 1 072 Arpeggiator step beats | range 0.0625 to 4 | initial 0.25 073 Arpeggiator gate | range 0.1 to 0.95 | initial 0.7 074 Studio engine | range 0 to 1 | initial 0 075 Osc 1 engine | range 0 to 2 | initial 0 076 Osc 2 engine | range 0 to 2 | initial 0 077 Osc 1 spectrum | range 0 to 1 | initial 0.3 078 Osc 2 spectrum | range 0 to 1 | initial 0.6 079 Voice mode | range 0 to 2 | initial 0 080 Glide | range 0 to 2 | initial 0 081 Drive | range 0 to 1 | initial 0 082 Drive tone | range 0 to 1 | initial 0.55 083 Chorus mix | range 0 to 1 | initial 0 084 Chorus depth | range 0 to 1 | initial 0.5 085 Chorus rate | range 0.05 to 5 | initial 0.3 086 Delay mix | range 0 to 1 | initial 0 087 Delay time | range 0.01 to 2 | initial 0.375 088 Delay feedback | range 0 to 0.9 | initial 0.35 089 Delay tone | range 0.05 to 1 | initial 0.5 090 Delay tempo sync | range 0 to 1 | initial 0 091 Delay beats | range 0.0625 to 4 | initial 0.75 092 Reverb mix | range 0 to 1 | initial 0 093 Reverb size | range 0.1 to 1 | initial 0.65 094 Reverb decay | range 0.25 to 12 | initial 3 095 Reverb damping | range 0.05 to 1 | initial 0.6 096 Reverb width | range 0 to 1 | initial 0.85 097 Stereo width | range 0 to 1.5 | initial 1 098 Motion | range 0 to 1 | initial 0 099 Colour | range 0 to 1 | initial 0 100 Mod 1 source | range 0 to 10 | initial 0 101 Mod 1 target | range 0 to 12 | initial 0 102 Mod 1 amount | range -1 to 1 | initial 0 103 Mod 2 source | range 0 to 10 | initial 0 104 Mod 2 target | range 0 to 12 | initial 0 105 Mod 2 amount | range -1 to 1 | initial 0 106 Mod 3 source | range 0 to 10 | initial 0 107 Mod 3 target | range 0 to 12 | initial 0 108 Mod 3 amount | range -1 to 1 | initial 0 109 Mod 4 source | range 0 to 10 | initial 0 110 Mod 4 target | range 0 to 12 | initial 0 111 Mod 4 amount | range -1 to 1 | initial 0 112 Arp host sync | range 0 to 1 | initial 0 113 Arp swing | range 0 to 0.5 | initial 0 114 Arp latch | range 0 to 1 | initial 0 115 LFO 1 sync | range 0 to 1 | initial 0 116 LFO 2 sync | range 0 to 1 | initial 0 117 LFO 1 beats | range 0.0625 to 16 | initial 1 118 LFO 2 beats | range 0.0625 to 16 | initial 2 119 Noise tone | range 0 to 1 | initial 1 PLATFORM Apple Silicon Mac, macOS 13 or later, AU-compatible instrument host. This AU package does not include a standalone application, Windows or VST3. TRIAL AND ACTIVATION The full 14-day trial starts only when you choose Start trial. No subscription or automatic charge. A permanent purchase allows up to three computers, with online activation followed by offline use. Presets and project settings remain after expiry. See VIRAL-Trial-and-Activation-EN.txt for activation, deactivation and expiry behaviour. Support: info@lynchaudiolab.com