LYNCH BROKEN MEGAPHONE — USER GUIDE 0.1.1 Insert this audio effect on a voice, guitar, drums or any audio track. It accepts mono and stereo. Three buttons recall a useful device starting point, preserving Input, Output, Mix and Bypass: MEGAPHONE for horn presence, TELEPHONE for a small receiver, RADIO for broadcast color. Radio Band recalls AM, FM or Shortwave settings. Host automation of Device/Radio Band changes circuit color only; it does not overwrite other parameters. LOW CUT removes low end; HIGH CUT limits the upper band. Both are 12 dB/oct. FOCUS locates the nasal emphasis; HONK adds it. BAND GUIDE draws the effective band, not a measured spectrum. Frequencies follow the sample-rate limits; crossed bands narrow safely. DRIVE is compensated, four-times oversampled saturation. BROKEN adds loose-contact dips, crackle and harder distortion. SQUEEZE compresses the level; GR shows attenuation. MIX blends the latency-aligned original. OUTPUT sets the final level. TEXTURE opens Static, Flutter, Crush, Distance, Slap and Slap Time. Static gives colored interference; Noise Follow gates it with the input. With Noise Follow off, static continues only while the host renders audio (some DAWs suspend silent tracks). Flutter adds free-running amplitude and pitch instability. Crush deliberately adds digital bit/sample-rate grit. Distance rolls off air and adds short reflections. Slap adds a short, gently repeating echo. Slap Time runs from 40–180 ms, independent of tempo. MONO SPEAKER collapses the wet path, preserving dry stereo. PROTECT applies a -0.5 dBFS sample ceiling; it is not a true-peak limiter. BYPASS ON passes the original at unity with 16 samples latency. Init also passes the original (Mix 0, Output 0, stereo). Factory presets replace every sound parameter. Device buttons preserve your trims and Mix. 24 factory starting points, arrows, Init, Save and User. Save/User use standard .aupreset files; only Broken Megaphone presets can load. The current factory name tracks the actual settings; edits show Custom / User Sound. ? enables English help on sound controls. Drag knobs vertically; Shift is fine control. Double-click or right-click to reset a knob. Hover is optional: moving upward within a large knob reaches maximum and downward reaches minimum before leaving its area. Escape turns Hover off. UI Size provides 75–150% scaling, limited to the available screen. AUTOMATION AND MIDI All 22 parameters are published to AU host automation, with sample-offset events and ramps for continuous values. In Logic, press A and choose Broken Megaphone > parameter. Use Logic Pro > Control Surfaces > Learn Assignment for the selected parameter (Controller Assignments / Learn Mode) to map your MIDI control, move the plugin control and then your hardware control, and leave Learn Mode. The right-click menu opens this guide. There is no internal MIDI learn or tempo sync. The host owns MIDI assignments. This is original Lynch DSP inspired by small loudspeakers, receiver bandwidth and radio textures. It does not use third-party samples or impulse responses and is not a model of a specific commercial device. Private test build for Apple Silicon/macOS 12 or later. DAW reopening may be necessary after installation. Check available headroom when switching presets or adding Drive/Honk. TEXTURE PANEL 0.1.1 Texture opens inside the plugin window above the main controls. Close or Escape dismisses it. The panel follows UI Size automatically; it cannot fall behind a separate host window. Opening or closing it leaves your sound unchanged.