LYNCH ANALOG TAPE — USER GUIDE Version 0.3.1 / build 11 Apple Silicon Audio Unit · macOS 12 or later CURRENT RELEASE This version is Developer ID signed and notarized by Apple. A full 14-day trial begins only when Start trial is pressed. A paid license is permanent for up to three computers. The newly generated chassis and reel artwork are controlled by native AU parameters; no controls are baked into the image. LYNCH ANALOG TAPE LYNCH AUDIO LAB — USER GUIDE Nine virtual machines: Studio 800, Master 102, Valve 350, Porta, Cassette, Microcassette, Master 820, Four Track 37 and MTR 90. Magnetics, bias, head bump, speed/formula, wow/flutter, stereo drift, wear, crosstalk, dropouts and optional noise. Model profiles alter spectral response, flux/compression, hysteresis and transport behavior. Magnetic memory uses a bounded play model plus ADAA; it is not a measured Jiles–Atherton model. Speed choices are virtual tonal recipes across machines. This effect does not record files, provide transport Record/Play buttons or tape echo. Tape compression, transport, dropout and speed meters report the actual engine. Oversampling is 16x at 44.1/48 kHz, 8x at 88.2/96 kHz and 4x at 192 kHz. Host latency: 608 samples. 52 factory entries including Init; 30 host parameters. PRESETS AND CONTROLS PRESETS opens Instrument > Use > Sound. Factory selection loads the model and complete sound. Init restores a neutral starting point. Save writes an original user patch; User loads a compatible patch file. Arrows browse factory sounds. User patches include the complete parameter state and model. Audio controls are exposed to host automation; right-click exposes host parameter information. Drag to adjust; Shift gives fine movement; double-click resets a dial. There are no hover-only parameter changes. ? enables contextual help. Guide opens an integrated frontmost reading panel; Close/Escape returns to editing. UI Size has six available scales. ON/OFF text and illumination identify active modules. LEVELS AND SAFETY Input, Output and Mix are manual controls. No continuously riding automatic level matching is added. Init is neutral with latency-aligned dry audio. Sample Protect is optional sample protection, not a true-peak limiter. Output can exceed full scale with protection off; observe the meters. IMPLEMENTATION AND LIMITS These are original Lynch algorithms informed by historical tape behavior. They are not measured or calibrated replicas of individual hardware machines. No vendor DSP code, branded hardware artwork or third-party sample packs are included. Engineering tests do not establish physical-hardware fidelity or subjective musical preference. USING THE EDITOR The concept materials are now used in the real native editor. Knobs and faders are live controls. Drag vertically; hold Shift for fine adjustments. Scroll over a control to adjust it, double-click to reset, or right-click for reset and host automation guidance. Hover alone never changes a parameter. Click PRESETS to open Instrument > Use > Sound folders. Save stores a User sound. DETAILS / USER exposes every parameter with its exact current value, including processing enables, routing and controls not engraved on the panel. The tiny size selector at top right provides six editor sizes. ? enables explanatory tooltips. Guide opens in front inside this editor; Escape closes the guide or the details drawer. The original artwork's engraved scales and fixed curve symbols are visual references; actual ranges and the current values are shown while adjusting and in DETAILS. Native VU movement is based on real audio measurements. These are original inspired DSP models, not measured hardware replicas. The illustrated reel-to-reel body is an insert effect. It does not record audio files. TAPE ALIGNMENT / DETAILS opens the full processing controls. CONTROLS AND SIGNAL ROUTING Knobs have stable centered hardware geometry and fixed outer rings. Their pointers turn without moving the body or rotating a cropped background. Model, ratio and enable buttons use real LED indicators, without orange selection frames. LEDs dim when the corresponding control is unavailable. Global Wet Mix at0% and Bypass reproduce the exact original input, delayed by the reported plugin latency. Input, Output, coloration, noise and protection act on the wet branch. At50% the global blend is an aligned linear mix of the original input and the full processed signal. This is not an automatic leveler. MODEL PANELS AND TRANSPORT The Audio Unit product name begins with Lynch under Lynch Audio Lab. Component identity and parameter IDs remain unchanged. Model changes from the main buttons, host automation, factory presets and saved state all select the corresponding panel. Details / User keeps the complete parameter set available. The original concept textures and engraved slogan remain part of the interface. These are original hardware-inspired designs and algorithms, not certified replicas of physical units. Each tape machine has its own finish and name. Cassette, Porta and Micro use a generated photoreal cassette transport. Open reels retain the original photographic guides, rollers and heads. Moving reels and cassette hubs follow tape speed and actual Audio Unit rendering while Tape In is enabled and Bypass is off. Animation pauses without rendering and when the editor closes. Transport graphics are visual; this remains an insert effect, not a file recorder. The existing Tape Alignment / Details drawer controls record drive, filters and advanced tape parameters. MODEL DECKS AND CALIBRATION Model changes the visible machine deck, finish, reel geometry, knob material and control grouping. Open-reel, mastering, valve and compact-cassette families use distinct panels made from our own artwork and native hardware controls. They are historical design interpretations, not exact photographic replicas. All nine models remain stereo insert effects; Porta is not a four-track DAW. Record Drive and Tape Headroom now have dedicated front-panel knobs. Mouse edits to band parameters enable Tape In; HP/LP cutoff edits enable the corresponding filter; Noise Level edits enable Noise. Host automation remains explicit: automate the module enable along with its parameters when needed. Input (Record) and Output (Repro) trims also work with Tape In off. They do not change fully Dry or Bypass. Output 0 dB is at twelve o'clock despite the asymmetric -36/+24 range. HP/LP positions use the same logarithmic mapping as exact values. HP 20 Hz and LP 20 kHz are open endpoints. LP 0 Hz closes the filtered wet path; separately generated noise is added after the filters and Dry remains audible. The VU needles are now fully native, not painted into the background: 0 VU is -18 dBFS RMS; +3 VU is -15 dBFS RMS. VU is not a digital clipping meter. Animation follows actual audio rendering and selected tape speed. It pauses when rendering stops, Tape In is off, or Bypass is on. Live monitoring in a DAW may keep rendering while its transport is stopped. Closing the editor stops its animation timer. Reel speed is illustrative; this is not a physical spool length simulation. Animation changes no audio samples. CONTEXT FOR AUDITIONING Drive adds level and saturation; Headroom changes magnetic saturation margin. Stereo Drift needs Wow/Flutter to be audible; crosstalk needs unequal L/R audio. Wow/Flutter rates need nonzero depths. Bass/Treble and wear need Tape In. Noise is input-armed, holds six seconds and fades for two; a fresh silent instance has no noise until audio arrives. Default Noise -72 dBFS is subtle. Enable Noise and raise it for an obvious test. Noise calibration was measured near -50 dBFS at five sample rates using the -50 dB setting. No automatic level riding has been added. VALIDATION Thirty parameter paths, nine models, five sample rates, mono/stereo layouts, latency-aligned Dry/Bypass, automation, preset/state roundtrip, no audio-thread heap allocation, finite extreme inputs, reference aliasing tests and actual native editor/transport tests. Physical-machine measurement and musical approval in Logic remain separate from these engineering checks. Noise uses a physical two-position OFF/ON slide switch with a live LED. Click to toggle. Noise Level remains the independent amount control. DSP and parameter identities are unchanged.