LYNCH ANALOG PREAMP LYNCH AUDIO LAB — PRIVATE USER GUIDE Version 0.2.0 / build 5 — 2026-10-14 SIX CIRCUIT CHARACTERS Tube 610, Tube 47 and Tube V76 provide three tube-inspired voices. Class A 1073, Discrete 512 and Console VCA provide three transistor-inspired voices. Each has its own panel layout, metal finish, control arrangement and hardware knobs. Selecting a model changes its circuit and panel while retaining your control values. Factory presets and saved user states also restore the model. These are original Lynch circuit-inspired algorithms, not individual measured replicas of physical UA, Neve, API, EMI, Telefunken or SSL equipment. The appearance draws on those hardware families with Lynch controls and branding. No vendor DSP code, proprietary response recordings or Goldbaby samples are included. SIGNAL FLOW AND ENABLES Input and Polarity feed the wet path. Independent High Pass and Low Pass stages precede the Color circuit. Color contains Drive, Headroom, Bias, Transformer and the Body/Air contours. Output and optional Sample Protect follow, before the latency-aligned Dry / Wet blend and global Bypass. The front panel has six physical switches with clear positions and LEDs: Polarity, Color, HPF, LPF, Protect and Bypass. For Polarity, ON means inverted polarity; OFF is normal. Bypass ON returns the original signal. Changing Drive, Headroom, Bias, Transformer, Body or Air with the mouse turns Color ON so the control is heard immediately. This also applies in Details. Host automation keeps these controls and Preamp enabled separate: automate Preamp enabled ON when automation should drive the color circuit. Changing models does not itself enable Color. Turning Color OFF leaves the independent filters available. Moving a filter frequency in either panel away from its open endpoint engages that filter. The switches provide explicit independent filter enables. Direct host automation likewise retains separate frequency and enable parameters. LEVEL AND COLOR CONTROLS Input (-24 to +24 dB) changes the signal entering the wet path. It can push an enabled color circuit into saturation. Its center is exactly 0 dB. Drive (0 to 36 dB) increases the level exciting the nonlinear circuit. The circuit uses a fixed compensation law to keep its output more manageable; this is not an adaptive leveler. Use Output to set the final processed level. Headroom (-12 to +12 dB) changes the saturation threshold. Lower Headroom means earlier saturation, more harmonic color and more peak compression. Higher Headroom gives cleaner peaks for the same Input and Drive. It is not another volume control: quiet signals can sound very similar because they remain in the linear region. To audition it, enable Color and use moderate Drive on a signal with clear transients. Bias (-100 to +100%) changes the symmetry of the nonlinear stages, affecting even harmonics and waveform shape. A change need not increase the overall volume. Its result depends on the model and how strongly the circuit is being driven. The center is the model's nominal bias, not a promise of zero even harmonics. Transformer (0 to 100%) controls a parallel low-frequency saturation branch. Its effect is most apparent on driven bass-rich signals, including kick, bass and low piano notes. It is not a static bass boost, and a quiet high-frequency signal may show little change. Zero removes this additional transformer branch; the selected preamp circuit still operates when Color is ON. Body (-6 to +6 dB) is a broad low shelf around 150 Hz. Air (-6 to +6 dB) is a broad high shelf around 8 kHz. Both belong to the Color stage. FILTERS High Pass spans 20 Hz to 20 kHz; its 20 Hz endpoint opens the stage. Low Pass spans 0 Hz to 20 kHz; zero closes the stage and 20 kHz opens it. Both have independent ON/OFF switches. The main panel and Details share the same frequency mapping, and the live numerical readout is the exact setting. The filters are not controlled by the Color switch. OUTPUT, DRY / WET AND POLARITY Output spans -36 to +24 dB. The output knob has a calibrated center of 0 dB; turning left attenuates and turning right boosts. Input and Output are manual controls. There is no continuously riding automatic level matching. Dry / Wet at 0% and Bypass ON reproduce the exact original input delayed by the reported 96-sample plugin latency. At 50%, the blend is an aligned linear mix of original and processed audio. Input, Output, Color, filters, Polarity and Protect act only on the processed branch. Polarity inverts the processed branch. With neutral processing and a 50% blend, inverted wet audio can cancel the dry audio; that is expected polarity cancellation. Use 100% Wet when checking the Polarity switch on its own. Protect applies optional soft sample-peak protection. It is not a true-peak mastering limiter. With Protect OFF the output can exceed digital full scale; use Output and the meters to manage the level. METERS The native moving VU needles use calibrated faces: 0 VU represents -18 dBFS RMS, and +3 VU represents -15 dBFS RMS. +3 VU is supported and is not the digital clipping threshold. These are average-level meters, not true-peak meters. Each face is labeled with its measured input or output signal. PRESETS, AUTOMATION AND EDITING There are 37 factory entries including Init and 18 stable host parameters. PRESETS opens Instrument > Use > Sound folders. Factory selection loads the complete sound and model. Init restores the neutral starting point. Save writes a User patch; Details / User loads compatible saved patches. User patches include the complete parameter state and model. Existing parameter IDs and AU identity remain unchanged. All audio controls are exposed to host automation. Drag vertically to adjust knobs, hold Shift for fine movement, scroll over a control to adjust, or double-click a dial to reset. Right-click offers reset and host controller assignment guidance. Use Logic Controller Assignments for MIDI hardware; there is no separate internal MIDI Learn system. Hover alone never changes a parameter. Click a physical switch to change between its two states. Save, Init and Guide remain momentary actions. Details / User exposes every parameter with its exact value. The size selector provides six editor scales within the current display. ? enables contextual help. Guide opens in front inside the editor; Close or Escape returns to editing. Escape also closes Details. VALIDATION AND STATUS This is a private macOS arm64 Audio Unit development candidate. The 0.2.0 functional audit covers all 18 parameters and six voices at 44.1, 48, 88.2, 96 and 192 kHz. See the accompanying verification files for measured outcomes, UI/build checks and AU validation. An installation is confirmed only by its matching installation receipt, not by this guide. Actual production listening, broader DAW/platform testing, hardware-reference calibration, commercial signing and release validation remain separate gates. The update preserves the existing AU identity, parameter IDs, preset/state format and 96-sample latency. Shared cores and other Lynch plugins are not modified by this local editor/function audit.